Worry Free Install
Friendly and Helpful
CarPro Iron X Lemon Scent 500ml (17oz)
Iron X Lemon Scent 500ml (17oz)
We are very proud to present Iron X Lemon Scent!! IronX LS (Lemon Scent) offers less harsh odor, but even more of the brake dust blasting power you have come to expect from the industry leader in brake dust removal.
Iron X LS is an entirely new formula providing approximately 10% more iron dissolving power than ever before!
Highly effective, acid-free and pH balanced, CarPro Iron X stops rust spots and pre-mature failure of the clear coat by making short work of iron contaminant removal across the entire vehicle! Using Iron X saves time and helps avoid the laborious claying process used in traditional car care regimes. This formulation of CarPro Iron X is safe and effective for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to pre-mature corrosion.
Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers. This is a gradual process that is not evident until it's too late.
Iron X contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as Iron X. The Iron X Paint and wheels decontamination system was developed to remove the root of the problem (BELOW the top surface) rather than just shave off the top of the particle in the manner traditional claying offers.
During the use of your vehicle, brake dust and road grime become sintered to the surface of the paint, rims, and wheels due to the high temperatures they are exposed to. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented, by removing the ferrous particles.
Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple or red. This coloring affect is the Iron X forming a bond to the sintered iron on the car paint or wheel and changing its state to a water-soluble complex for easy wipe or rinse off. Stubborn, baked on grime may take a small amount of agitation.
Iron X is widely used by body shops, high-end detailers, and even dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle free of iron contaminants. No other iron decontamination product is as safe, fast, and effective! Purchase yours from Sky’s the Limit Car Care today!
- Completely new formula with even more power!
- Removes iron particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
- Safe to use, acid free, and pH neutral (pH 6-7).
- Safe to use on clear coat paint.
- Safe to use on aluminum, chrome, alloy, or clear coated vehicles.
- Shake bottle.
- Wash vehicle, rinse vehicle, and remove the majority of the water with a quick towel "once-over".
- Spray Iron X across the contaminated area or vehicle.
- After 2-5 minutes rinse off or wash off if dried (depending on environment and temperatures).
- Verify all Iron X is removed and dry vehicle.
- Remove nozzle and replace cap after use (to avoid leakage over time).
- Test in inconspicuous area before use.
- Do not use on anodized surfaces.
- Do not use on unknown aftermarket finishes, or low cost acrylic paint.
- Avoid using on fabric convertible tops or rubber that contains recycled tires.
- Keep out of reach of children and pets.
- Do not ingest.
- Use outside or in ventilated area.
- Avoid prolonged contact with skin.
- Avoid inhalation.
- Use PPE as needed.
Iron X Facts and Frequently Asked Questions:
How iron particles appear on your car surface and where?
Iron particles are all around us, and of course on our cars after traveling. They can be made from your car braking, driving near other cars, big trucks, train rails, industrial zones etc. They adhere to the cars surface and once they "stick" to your paint due to their sharp edges, together with sunshine, they start to bake into the soft car paint where they oxidize and rust.
How to prevent iron dust from etching your paint?
It’s almost impossible to prevent iron from sticking to the surface, but it has been proven that inorganic coatings (CQuartz) have a self-cleaning affect and can reduce the quantity of iron that adheres to the surface.
Is Iron X pH Neutral?
Why does it change color?
With Iron X it is due to chemical reaction between the chemicals and iron. Some other products change colors as well. There are very cheap chemicals other companies use that change their character simply by contact with air or iron but have zero to little dissolving power.
Why do you use fully plastic spray heads?
Iron X would react with normal triggers with metal springs inside.
Will Iron X stain chrome wheels or chrome trims?
No, it’s completely safe to use on any chrome wheels, trim, or bare aluminum wheels.
Will Iron X discolor wheel weights?
Yes, it will. Wheel weights are made from lead, Iron X will change the lead color to green. However light agitation will recover the original color.
Will Iron X affect brake calipers?
For most high end calipers it will not affect them, however it can affect the paint color of low quality acrylic painted calipers. For this reason we advise you to be careful near calipers if unsure of the finish or type of paint.
Will Iron X remove wax from car paint?
Yes, if it’s a highly organic oil type it will affect the wax properties. If it’s a synthetic polymer sealant it won’t affect it much. On CarPro Sealants, Cquartz coatings, or other true coatings it won’t affect them at all. In fact it is designed for use on coatings as well.
Does Iron X remove tar spots as well?
No, Iron X reacts only with iron particles.
Is Iron X safe to use on 3M and Paint Protection Film?
Yes, there is no problem at all using it on clear bra and modern PPF when used properly.
Why does it smell so bad?
This is the nature of the chemical used.
Why does Iron X have low viscosity?
If you make the product too thick it will not react well with iron particles due to the thickener additives. If you make it too thin there will only be a short reaction time, which will leave some iron behind. With Iron X we have found the sweet spot between these two variables to create the most potent but safe iron fallout remover on the market.
Can I leave Iron X to dry on the surface?
Yes, Iron X could dry on the surface of a modern gloss clear coat paint system as long as you wash it off, but do not let it dry on the surface when under direct sun.
We are typically very quick and have a 24-48 hour turnaround time. Transit time depends on your order and which warehouse we are shipping from, but typical transit times are between 5-7 business days from one side of the US to the other.
Majority of the items we offer do ship free to the lower contiguous 48 states. States that require plane or boat to reach (such as Hawaii, Alaska, Puerto Rico, etc) do NOT qualify for free shipping. Please contact us to inquire about international shipping costs. During checkout, you will know which items ship free and which have shipping costs associated with them. In general, larger/heavier items will have additional shipping costs (body kits, wheels/rims, etc)
Even though everything can be shipped internationally, sometimes the cost is simply just too high and doesn't make sense to do so. We're here to make sure you have a great shopping experience, so if you have a product(s) you want to inquire about, please contact us at email@example.com
Yes, we do price match reputable competitors in the marketplace. If you find a product cheaper elsewhere, please email us the (1) link of the product from our website and (2) the link to the competitor site. We will make an assessment on our end if we are able to price match or not and respond to you via email.
Typically you have 14 days to return a product you purchase when you change your mind. Damaged and improperly installed products are NOT eligible for returns. Shipping fees may be assessed and not refunded based on criteria as well as restocking fees. Please see our FAQ page for more details.
Unfortunate Kies Motorsports no longer does customer installs (with the exception of crank hubs - we still do thos inhouse). Our HQ is solely reserved for filming, office space, and shipping/receiving.