{"product_id":"mhc-bmw-f87-m2-m2-competition-gtx-adjustable-front-aero-add-on-pre-preg-carbon-fibre","title":"MHC+ BMW F87 M2 \u0026 M2 Competition GTX Adjustable Front Aero Add On In Pre Preg Carbon Fibre","description":"\u003cp\u003e\u003cstrong\u003eDelivery notice:\u003c\/strong\u003e MHC products CAN take up to 3 weeks to arrive from Great Britain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptional USA import coverage:\u003c\/strong\u003e Select all VAT\/duties covered to add 10% to the product price. Kies\/MHC will cover all import charges for delivery to the USA, with nothing further due for import charges on arrival. If you decline coverage, you are responsible for applicable import charges. Coverage applies to USA deliveries only.\u003c\/p\u003e\u003cp\u003eTake your GTX front end further with the \u003cstrong\u003eMHC+ GTX Adjustable Front Aero Add On for the F87 M2 \u0026amp; M2 Competition\u003c\/strong\u003e, the adjustable lower section of the two-piece GTX front splitter system. Manufactured from 100% pre-preg (“dry”) carbon fibre, it mounts to the GTX front splitter and extends the front aero a further \u003cstrong\u003e20–50mm\u003c\/strong\u003e forward, letting you set front-end aggression and aerodynamic balance exactly where you want it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this is an add-on. The \u003cstrong\u003eMHC+ GTX Front Splitter (M2 N55 or M2 Competition S55 version)\u003c\/strong\u003e is required and is sold separately, or buy both together as part of the complete MHC+ GTX Aero Kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable lower add-on for the MHC+ GTX front splitter\u003c\/li\u003e\n\u003cli\u003eDesigned for the BMW F87 M2 \u0026amp; M2 Competition\u003c\/li\u003e\n\u003cli\u003eRequires the MHC+ GTX Front Splitter (M2 N55 or M2 Competition S55 version) (sold separately)\u003c\/li\u003e\n\u003cli\u003eAdjustable 20–50mm forward extension\u003c\/li\u003e\n\u003cli\u003eManufactured from 100% pre-preg (“dry”) carbon fibre\u003c\/li\u003e\n\u003cli\u003eOEM-style 2x2 twill carbon weave\u003c\/li\u003e\n\u003cli\u003eDeep high-gloss UV-resistant lacquer finish\u003c\/li\u003e\n\u003cli\u003eDedicated captive mounting system using supplied billets and M6 hardware\u003c\/li\u003e\n\u003cli\u003eRequires removal of the front bumper to fit\u003c\/li\u003e\n\u003cli\u003eBacked by MHC LDN’s 3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAdjustable Motorsport Aero\u003c\/h3\u003e\n\u003cp\u003eThe lower section extends the splitter approximately \u003cstrong\u003e20–50mm further forward\u003c\/strong\u003e, allowing owners to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease front-end aggression\u003c\/li\u003e\n\u003cli\u003eFine-tune aerodynamic balance\u003c\/li\u003e\n\u003cli\u003eCreate a more track-inspired appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA dedicated captive mounting system isolates aerodynamic load from the bumper itself, improving structural integrity under high-speed use. Set the amount of protrusion at the trial-fit stage, before anything is committed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAdd It Now or Add It Later\u003c\/h3\u003e\n\u003cp\u003eThe GTX system is modular by design. Whether you bought your splitter last week or last year, the mounting provision is already there – this add-on bolts straight to it with the supplied billets, threaded uppers and M6 hardware. Nothing on the original splitter needs modifying.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFits using:\u003c\/strong\u003e supplied fitting billets, bonded threaded uppers and M6 nuts and bolts, plus pre-applied automotive-grade adhesive tape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTools required\u003c\/strong\u003e – items marked (supplied) are included in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill\u003c\/li\u003e\n\u003cli\u003e6.5mm drill bit (supplied) – lower mounting holes\u003c\/li\u003e\n\u003cli\u003e2.5mm drill bit (supplied)\u003c\/li\u003e\n\u003cli\u003ePZ2 driver bit (supplied)\u003c\/li\u003e\n\u003cli\u003e10mm socket and 10mm spanner – M6 hardware\u003c\/li\u003e\n\u003cli\u003ePanel wipe or IPA and lint-free cloths (alcohol wipes supplied)\u003c\/li\u003e\n\u003cli\u003eMasking tape\u003c\/li\u003e\n\u003cli\u003eTrim removal tools\u003c\/li\u003e\n\u003cli\u003eRamps, or a jack and axle stands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTime to fit:\u003c\/strong\u003e 90 minutes (complete splitter assembly, bumper off)\u003cbr\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate – drilling and bumper removal required\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires removal of the front bumper to fit.\u003c\/strong\u003e The bumper comes off with the upper splitter attached, the assembly is built up on the bench, then the whole thing goes back on the car.\u003c\/p\u003e\n\u003cp\u003eThe 90 minutes covers the full job including bumper removal and refitting.\u003c\/p\u003e\n\u003cp\u003eAll required fixings and consumables are supplied. Best fitted indoors, above 15°C, on a clean, dry car – trial fit before committing any adhesive tape. A full step-by-step GTX fitting guide is available, and professional installation is recommended for the best possible result.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrecision OEM-Level Fitment\u003c\/h3\u003e\n\u003cp\u003eMHC+ developed this component using:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull 3D scans of the BMW F87 chassis\u003c\/li\u003e\n\u003cli\u003eAdvanced CAD modelling and engineering\u003c\/li\u003e\n\u003cli\u003eOEM-level panel alignment development\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis ensures flush integration with the factory body lines, accurate panel alignment and OEM-style fitment quality. No cutting or compromise required.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePremium Pre-Preg Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eUnlike conventional wet carbon fibre products, MHC+ uses genuine \u003cstrong\u003epre-preg (“dry”) carbon fibre\u003c\/strong\u003e, delivering:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased strength and rigidity\u003c\/li\u003e\n\u003cli\u003eReduced overall weight\u003c\/li\u003e\n\u003cli\u003eSuperior weave consistency\u003c\/li\u003e\n\u003cli\u003eMinimal imperfections or air pockets\u003c\/li\u003e\n\u003cli\u003eExceptional long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach component is cured under controlled heat and pressure to achieve optimal resin saturation, producing a premium carbon fibre part suitable for high-end BMW builds.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDeep High-Gloss Finish\u003c\/h3\u003e\n\u003cp\u003eFinished in a premium \u003cstrong\u003eUV-stable gloss lacquer\u003c\/strong\u003e, every GTX component offers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent resistance to fading and yellowing\u003c\/li\u003e\n\u003cli\u003eA rich OEM-style appearance\u003c\/li\u003e\n\u003cli\u003eSeamless compatibility with other MHC+ carbon fibre components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSupplied Ready to Install\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFitting billets and threaded uppers\u003c\/li\u003e\n\u003cli\u003eM6 nuts and bolts\u003c\/li\u003e\n\u003cli\u003ePre-applied automotive-grade double-sided tape\u003c\/li\u003e\n\u003cli\u003e6.5mm drill bit, 2.5mm drill bit and PZ2 driver bit\u003c\/li\u003e\n\u003cli\u003eAlcohol wipes for surface preparation\u003c\/li\u003e\n\u003cli\u003eMHC LDN fitment guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eRequires the MHC+ GTX front splitter to be fitted.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F87 M2 (N55)\u003c\/li\u003e\n\u003cli\u003eBMW F87 M2 Competition (S55)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy Choose MHC+?\u003c\/h3\u003e\n\u003cp\u003eMHC+ is recognised globally for producing premium BMW carbon fibre styling upgrades with precise fitment, OEM-inspired design and exceptional manufacturing quality.\u003c\/p\u003e\n\u003cp\u003eFinish your GTX front end with the \u003cstrong\u003eMHC+ GTX Adjustable Front Aero Add On\u003c\/strong\u003e, delivering adjustable motorsport aero, premium pre-preg carbon fibre construction and OEM-quality fitment for the F87 M2 platform.\u003c\/p\u003e","brand":"MHC","offers":[{"title":"No - pay import charges on arrival","offer_id":46227007242325,"sku":"MHCP-F87-CF-FS004","price":650.0,"currency_code":"USD","in_stock":true},{"title":"Yes - all VAT\/duties covered (+10%)","offer_id":46227007275093,"sku":"MHCP-F87-CF-FS004-USA-COVERED","price":715.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0074\/3702\/5395\/files\/kies-motorsports-mhc-mhc-bmw-f87-m2-m2-competition-gtx-adjustable-front-aero-add-on-in-pre-preg-carbon-fibre-1259793378.jpg?v=1790197546","url":"https:\/\/www.kiesmotorsports.com\/products\/mhc-bmw-f87-m2-m2-competition-gtx-adjustable-front-aero-add-on-pre-preg-carbon-fibre","provider":"Kies Motorsports","version":"1.0","type":"link"}