-
Vendor:proTuning Freaks
BOOTMOD3 N20 N26 - BMW F Chassis 125i 220i 228i 320i 328i 420i 428i 520i 528i Tune
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:proTuning Freaks
BootMod3 OTS Map Pack - N20 N26 N55 B58 B48 B46 Tunes
*** bootmod3 software license required prior to OTS Maps Bundle purchase *** bootmod3 software license purchase by default includes 1 paid OTS map and you can choose the one most appropriate for your hardware modifications and octane upon license activation. It also includes any other...- $50.00 USD
$50.00 USD- $50.00 USD
- Unit price
- per
-
Vendor:Rennline
Rennline BMW ExactFit Magnetic Phone Mount - BMW F30, F32, F36, F80, F82 (3 series and 4 series 2013-2019)
NOTE: This product will NOT work with a leather dash. In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market...- $58.50 USD
- $58.50 USD
- Unit price
- per
-
Vendor:Clearance
Kies Motorsports Replacement BMW F30 Inner Door Pull Handle Trim- 4 Piece Set (320i, 328i, 330i, 335i, and 340i) - Black
BMW's are amazing. What's not amazing is that over time, the rubber in the F30 BMW's inner door handles start to deteriorate, leaving them sticky and gross. Kies Motorsports presents the Kies Motorsports F30 inner door pull handles, a direct replacement to combat this...- From $145.00 USD
- From $145.00 USD
- Unit price
- per
-
Black
-
Beige
-
Hydro-dipped Carbon Look
-
Gloss Carbon FIber
-
Vendor:proTuning Freaks
BOOTMOD3 N55 - BMW F Chassis M135I 235I M235I 335I 435I 335I 535I ActiveHybrid 640I X3 X4M40I X4 X5 X6 M2 Tune
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:Motorsport Hardware
Motorsport Hardware 5-Lug (14 x 1.25 to 14 x 1.5 Thread Conversion) 78mm Black Bullet Nose Stud Kit (F / G Series BMW & A90 Supra)
Perfect for F-Chassis or 14x1.25 Track/Race applications! Converts fine 14x1.25 thread to coarse 14x1.5 thread for incredible durability! Avoid cross threading the fine 14x1.25 thread Save your wheel hub from repeated off-on damage Manufactured in the USA by Nuclear Power Plant supplier 12.9 grade...- From $149.60 USD
- From $149.60 USD
- Unit price
- per
-
Vendor:MST
MST BMW N20/26 2.0T Turbo Inlet Pipe
Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off-road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off-road and racing use only for unregistered vehicles. Please check with your...- $293.70 USD
$293.70 USD- $293.70 USD
- Unit price
- per
-
Vendor:MST
MST BMW B58 140i/240i/340i/440i Cold Air Intake System (F Series)
Lead time is approximately 2 weeks. Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off road and racing use...- $463.10 USD
$463.10 USD- $463.10 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 B58 - BMW FXX GXX 140i 240i 340i 440i 540i 740i M240i M140i X3 40i M40i
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:proTuning Freaks
BOOTMOD3 S55 - BMW F80 F82 F87 M3 / M4 / M2 Competition Tune
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...- $595.00 USD
- $595.00 USD
- Unit price
- per
-
Vendor:dAHLer
dAHLer Exhaust Flap / Valve Control Module With Remote Control for F & G series
What does the new IP68 rated waterproof dÄHLer Valve Controller mean?An IP68 rating, protects your dÄHLer Valve Controller (VC) from the harsh roadelements you will encounter with the upmost resiliency of protection! "IP"stands for Ingress Protection, and the numbers indicate the level of protectionagainst...- From $546.00 USD
$573.30 USD- From $546.00 USD
- Unit price
- per
-
Vendor:MST
MST BMW F3X N20/N26 Air Intake System
Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off-road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off-road and racing use only for unregistered vehicles. Please check with your...- $499.40 USD
$499.40 USD- $499.40 USD
- Unit price
- per
-
Vendor:MST
MST 2019-2024 BMW G20 B48/B46 2.0L Cold Air Intake System (Includes Inlet)
Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off road and racing use only for unregistered vehicles. Please check...- $535.70 USD
$535.70 USD- $535.70 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 B48 B46 - BMW FXX GXX 120i 125i 220i 225i 230i 320i 330i 420i 430i 520i 530i X3/X4 20i 30i
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:MST
MST BMW 2020-2024 G20 B58 3.0L Turbo Cold Air Intake
Lead time is approximately 2 weeks. SECOND GEN B58 ONLY Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off-road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off-road and...- $510.40 USD
$510.40 USD- $510.40 USD
- Unit price
- per
-
Vendor:Clearance
2012-2018 BMW 3 Series (F30) / 2014+ BMW M3 (F80) PSM Aggressive High Kick Carbon Fiber Trunk Spoiler
Introducing the Kies Carbon BMW F30 3 series carbon fiber high kick aggressive style trunk spoiler for your 2012-2018 F30 BMW 3 series sedans. It also fits the 2014+ F80 M3 sports sedan big brother. This high kick aggressive style is very similar to the popular PSM style, however...- $277.60 USD
- $277.60 USD
- Unit price
- per
-
Vendor:Turbosmart
Turbosmart BMW N55 3.0L (E90/E92/F30) BOV Kompact EM Dual Port VR9 (No Drop Ship)
The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world's first genuinely plug-and-play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve. No adaptors, hoses or extra assembly are required.This Part...- $315.89 USD
$350.99 USD- $315.89 USD
- Unit price
- per
-
Vendor:TLG
TLG Guards for BMW G80 M3 / G82 M4 / G83 M4
Protect your car with the all-new TLG Guards for the BMW G80 / G82 / G83! These unsung heroes work silently to block rocks and road debris from shooting down the side of your car and causing scratches, paint chips and dents. Works on...- From $75.00 USD
- From $75.00 USD
- Unit price
- per
-
Vendor:VRSF
VRSF Charge Pipe Upgrade Kit 2012 - 2017 BMW M2/M135i/M235i/335i/435i & XI F20 & F30 N55
BACKORDER ETA 12/15 VRSF Charge Pipe Upgrade Kit for your 2012 – 2017 BMW M2, M235i, 335i & 435i N55 (It does fit the ActiveHybrid3 as well) Increase throttle response and decreases turbo lag with the VRSF Charge Pipe Upgrade for your F-chassis M2, M235i,...- $220.00 USD
- $220.00 USD
- Unit price
- per
-
Vendor:MST
MST BMW F3X B48/B46 Cold Air Intake System
Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off road and racing use only for unregistered vehicles. Please check...- $463.10 USD
$463.10 USD- $463.10 USD
- Unit price
- per















