Newly Added – Page 109 – Kies Motorsports

Sidebar

Choose options

Vendor:Visconti Tuning

CANBOXPRO - Universal Flex Fuel I/O Controller - CAN bus

The CANBOXPRO is a universal CAN bus flex fuel and I/O controller designed for high performance applications requiring clean, OEM-level integration with the factory ECU. Rather than intercepting or altering an existing factory signal, CANBOXPRO communicates directly over the vehicle CAN bus. Ethanol content...

From $349.00 USD

From $349.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

B48 B58 S58 Charge Pipe Sensor Adapter Harness

Plug and play charge pipe pressure sensor adapter harness for BMW B48, B58, and S58 engines designed for use with AEM 5, 6, or 7 BAR boost sensors. The B48 B58 S58 Charge Pipe Sensor Adapter Harness allows you to replace the factory 4...

$40.00 USD

$40.00 USD

Unit price

per
Choose options

Vendor:Visconti Tuning

ReFlex+ Visconti S58/B58 Sequential Port Injection Wiring Kit

The Visconti S58/B58 Sequential Port Injection Wiring Kit is our complete plug and play harness designed specifically for use with the ReFlex+ controller. This kit does not reuse any MOTIV wiring. All you need is a ReFlex+, this wiring kit, and the required I/O...

$895.00 USD

$895.00 USD

Unit price

per

Choose options
Choose options

Vendor:Visconti Tuning

ReFlex+ Plug and Play Install Harness — BMW S58/B58

The Visconti Tuning ReFlex+ Plug and Play Install Harness eliminates cutting, crimping, or splicing when installing a ReFlex+ controller on BMW S58 and B58 platforms using the standard install harness. It allows the MOTIV main harness to interface directly with the factory wiring while...

$420.00 USD

$420.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

B58 S58 Flex Fuel Integration Fitting

Designed specifically for use with the GM Continental ethanol content sensor used in most flex fuel applications. The Visconti Tuning B58 S58 Flex Fuel Integration Fitting is designed to integrate a flex fuel sensor into the factory high pressure fuel pump hard line. The...

$60.00 USD

$60.00 USD

Unit price

per
Vendor:Visconti Tuning

ReFlex+ Bracket - A90 Supra

The Visconti Tuning ReFlex+ Bracket for the Toyota A90 Supra provides a secure mounting solution for the MOTIV ReFlex+ controller. The Visconti Tuning MOTIV ReFlex+ bracket designed for the A90 Supra cleanly and safely mounts the ReFlex+ on the left-hand side of the vehicle,...

$40.00 USD

$40.00 USD

Unit price

per
Choose options

Vendor:Visconti Tuning

Visconti S58/B58 PTCAN2 Flex Fuel Sub Harness

Plug and play PTCAN2 flex fuel sub harness for BMW B58 and S58 engines designed to integrate flex fuel controllers or ReFlex+ port injection systems without modifying factory wiring. The Visconti B58 S58 PTCAN2 Flex Fuel Sub Harness is designed to integrate a Flex...

$350.00 USD

$350.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

ReFlex+ Visconti S58/B58 Engine Harness

Plug and play engine harness for BMW B58 and S58 ReFlex+ systems designed to provide the required camshaft and crankshaft signals for proper ReFlex controller operation. The ReFlex+ Visconti B58 S58 Engine Harness is the engine-side harness from the Visconti plug and play ReFlex+...

$150.00 USD

$150.00 USD

Unit price

per
Vendor:Visconti Tuning

ReFlex+ Bracket – G42 M240

The Visconti Tuning ReFlex+ Bracket for the BMW G42 M240 provides a secure mounting solution for the MOTIV ReFlex+ controller. This bracket cleanly mounts the ReFlex+ in the engine bay while keeping the controller positioned away from heat and moving components. Designed specifically for...

$40.00 USD

$40.00 USD

Unit price

per
Choose options

Vendor:Visconti Tuning

ReFlex+ Advanced I/O Integration - VR30 Q50/Q60 Plug-n-Play

The ReFlex+ Advanced I/O Integration Kit provides a plug-and-play solution for integrating the ReFlex+ system on VR30 powered Infiniti Q50 and Q60 platforms. This harness enables advanced sensor inputs, control outputs, and CANbus integration while maintaining a clean factory-style installation. Designed for high performance...

$1,674.00 USD

$1,674.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

ReFlex+ Bracket – G20 M340 (2020 Only)

The Visconti Tuning MOTIV ReFlex+ bracket, designed for only for the 2020 G40 M340, cleanly and safely mounts the ReFlex+ on the left-hand side of the vehicle, away from exhaust heat, next to the brake booster.

$40.00 USD

$40.00 USD

Unit price

per
Choose options

Vendor:Visconti Tuning

ReFlex+ Visconti S58/B58 Injector Harness

The ReFlex+ Visconti S58/B58 Injector Harness is part of the Visconti Plug and Play ReFlex+ port injection kit. Compatible with all versions of our ReFlex+ wiring kits. EV6 - This is the type of injector harness that comes with all our kits and what...

From $350.00 USD

From $350.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

Visconti Tuning Fuel Hat Passthrough Bulkhead Fitting

The Visconti Tuning Fuel Hat Passthrough Bulkhead Fitting provides a clean and reliable way to route wiring through the factory fuel hat. Designed for our STG1 fuel systems, this bulkhead fitting allows secondary fuel pump wiring to pass through the fuel hat while maintaining...

$195.00 USD

$195.00 USD

Unit price

per
Vendor:Visconti Tuning

ReFlex+ 0-10 Bar Pressure Sensor

The ReFlex 0-10 Bar Pressure Sensor provides accurate pressure measurement for motorsport applications including fuel pressure, oil pressure, boost pressure, coolant pressure, and exhaust back pressure. This 10 bar pressure sensor is ideal for high performance engines requiring reliable pressure monitoring. This sensor connects...

$110.00 USD

$110.00 USD

Unit price

per
Choose options

Vendor:Visconti Tuning

EcuTek ECU Connect Bluetooth Interface

High-speed Bluetooth connectivity for your mobile device Datalogging Display and record factory and RaceROM diagnostic parameters, including engine and transmission simultaneously* RaceROM integration Driver interaction with RaceROM features* Performance Analyser Test and share the results online Archive Stores log files and performance test results for sharing with tuners...

From $320.00 USD

From $320.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

Billet Rear Ride Height Sensor Bracket - Toyota GR Supra A90 A91 / BMW G20 G29

Billet aluminum replacement for the fragile factory rear ride height sensor bracket used on A90/A91 Supra and BMW G20/G29 vehicles. The original billet upgrade for your A90/A91 Supra and G20/G29 BMW rear ride height sensor. These cars use two suspension ride height sensors to...

$85.00 USD

$85.00 USD

Unit price

per
Vendor:Visconti Tuning

THOR WiFi Adapter: Wireless BMW Tuning & Diagnostics

Required for wireless flashing and datalogging when using the Thor software platform on supported BMW vehicles. The THOR WiFi adapter allows you to diagnose, troubleshoot, program,code and more with the most popular apps. 1 1/2 Faster than regular K/Dcan cables on the market.Supported Apps:THOR...

$69.00 USD

$69.00 USD

Unit price

per
Choose options

Vendor:Visconti Tuning

ReFlex+ Advanced I/O Integration - VR30 400Z Plug-n-Play

The ReFlex+ Advanced I/O Integration Kit provides a plug and play solution for integrating the ReFlex+ system on VR30 powered Nissan Z (400Z) platforms. This harness enables advanced sensor inputs, control outputs, and CANbus integration while maintaining a clean factory-style installation. Designed for high...

$1,674.00 USD

$1,674.00 USD

Unit price

per

Choose options
Vendor:Visconti Tuning

ReFlex+ Control Unit

The ReFlex+ Control Unit is an advanced integration module for performance vehicle tuning and auxiliary component control. The ReFlex+ was designed to run in a variety of configurations from standalone tuning to full CAN Bus integration, the ReFlex+ offers unparalleled precision, flexibility, and performance. Advanced Control Strategies...

$729.00 USD

$729.00 USD

Unit price

per
Vendor:Visconti Tuning

ReFlex+ Visconti S58/B58 Integration Harness

The Visconti S58/B58 Integration Harness is the primary harness from our ReFlex+ kit. It is designed to integrate the Flex Fuel Sub Harness, Injector Harness, and Engine Harness into the ReFlex+ controller. It provides a clean and reliable connection point for all required I...

$300.00 USD

$300.00 USD

Unit price

per

KIES MOTORSPORTS, LLC — TERMS AND CONDITIONS OF PURCHASE AND SALE Last Updated: April 29, 2026 THESE TERMS AND CONDITIONS CONTAIN VERY IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS CONDITIONS, LIMITATIONS, AND EXCLUSIONS THAT MIGHT APPLY TO YOU. PLEASE READ THEM CAREFULLY. THESE TERMS REQUIRE THE USE OF ARBITRATION (ON AN INDIVIDUAL BASIS ONLY) TO RESOLVE DISPUTES, RATHER THAN JURY TRIALS. BY PLACING AN ORDER FOR PRODUCTS OR SERVICES FROM OUR WEBSITE, YOU AFFIRM THAT YOU ARE OF LEGAL AGE TO ENTER INTO THIS AGREEMENT, AND YOU ACCEPT AND ARE BOUND BY THESE TERMS AND CONDITIONS. YOU MAY NOT ORDER OR OBTAIN PRODUCTS OR SERVICES FROM OUR WEBSITE IF YOU (i) DO NOT AGREE TO THESE TERMS, (ii) ARE NOT OF LEGAL AGE TO FORM A BINDING CONTRACT, OR (iii) ARE PROHIBITED FROM ACCESSING OR USING THIS WEBSITE OR ANY OF THIS WEBSITE'S CONTENT, PRODUCTS, OR SERVICES BY APPLICABLE LAW. CERTAIN SERVICES, INCLUDING WITHOUT LIMITATION DME/ECU UNLOCK SERVICES, BENCH UNLOCK SERVICES, TUNING SERVICES, AND DYNO SERVICES, ARE FURTHER RESTRICTED TO PURCHASERS WHO ARE AT LEAST EIGHTEEN (18) YEARS OF AGE AND WHO ARE THE LEGAL OWNER OF THE VEHICLE OR AN AUTHORIZED AGENT OF THE OWNER. ORDERS PLACED IN VIOLATION OF THIS RESTRICTION MAY BE CANCELLED AT THE COMPANY'S SOLE DISCRETION WITHOUT PRIOR NOTICE. These terms and conditions (these "Terms") apply to the purchase and sale of products and services from KIES MOTORSPORTS, LLC (the "Company") through Kies Motorsports (the "Site"). These Terms are subject to change by the Company (referred to as "us", "we", or "our" as the context may require) without prior written notice at any time, in our sole discretion. Any changes to these Terms will be in effect as of the "Last Updated" date referenced above or on the Site. You should review these Terms prior to purchasing any product or services that are available through the Site. Your continued use of the Site after the "Last Updated" date will constitute your acceptance of and agreement to such changes. 1. Order Acceptance and Cancellation. You agree that your order is an offer to buy, under these Terms, all products and services listed in your order. All orders must be accepted by us or we will not be obligated to sell the products or services to you. We may choose not to accept orders at our sole discretion, even after we send you a confirmation email with your order number and details of the items you have ordered. 2. Prices and Payment Terms. All prices, discounts, and promotions posted on this Site are subject to change without notice. The price charged for a product or service will be the price advertised on this Site at the time the order is placed, subject to the terms of any promotions or discounts that may be applicable. The price charged will be clearly stated in your order confirmation. Price increases will only apply to orders placed after the time of the increase. Posted prices do not include taxes or charges for shipping and handling. All such taxes and charges will be added to your total price, and will be itemized in your shopping cart and in your order confirmation email. We strive to display accurate price information, however we may, on occasion, make inadvertent typographical errors, inaccuracies, or omissions related to pricing and availability. We reserve the right to correct any errors, inaccuracies, or omissions at any time and to cancel any orders arising from such occurrences. Terms of payment are within our sole discretion and, unless otherwise agreed by us in writing, payment must be received by us before our acceptance of an order. You represent and warrant that (i) the credit card information you supply to us is true, correct and complete, (ii) you are duly authorized to use such credit card for the purchase, (iii) charges incurred by you will be honored by your credit card company, and (iv) you will pay charges incurred by you at the posted prices, including shipping and handling charges and all applicable taxes, if any, regardless of the amount quoted on the Site at the time of your order. 3. Shipments; Delivery; Title and Risk of Loss. We will arrange for shipment of the products you order through the Site to you. Please check the individual product page for specific delivery options. You will pay all shipping and handling charges unless otherwise specified in the order confirmation. Title and risk of loss pass to you upon our transfer of the products to the carrier or delivery agent. Shipping and delivery dates are estimates only and cannot be guaranteed. We are not liable for any delays in shipments. 4. All Sales Final. ALL SALES AND PURCHASES THROUGH THE SITE ARE FINAL UNLESS WE EXPRESSLY AGREE OTHERWISE IN WRITING. WE DO NOT ACCEPT RETURNS OR OFFER REFUNDS ON ANY PRODUCTS OR SERVICES SOLD THROUGH THE SITE. 5. Manufacturer's Warranty and Disclaimers. We do not manufacture or control any of the products offered on our Site. Accordingly, we do not provide any warranties with respect to the products offered on our Site. However, the products offered on our Site may be covered by the manufacturer's warranty as included with the product. To obtain warranty service for defective products, please follow the instructions included in the manufacturer's warranty. We do not provide any warranty or guarantee (whether express or implied) with respect to the services offered through our Site (e.g., installation of third-party products by the Company or its agents). ALL PRODUCTS AND SERVICES OFFERED ON THIS SITE ARE PROVIDED "AS IS" WITHOUT ANY WARRANTY WHATSOEVER, INCLUDING, WITHOUT LIMITATION, ANY (A) WARRANTY OF MERCHANTABILITY; (B) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; OR (C) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY; WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE, OR OTHERWISE. SOME JURISDICTIONS LIMIT OR DO NOT ALLOW THE DISCLAIMER OF IMPLIED OR OTHER WARRANTIES, SO THE ABOVE DISCLAIMER MAY NOT APPLY TO YOU. YOU AFFIRM THAT WE SHALL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR ANY BREACH OF WARRANTY CLAIMS OR FOR ANY DAMAGES ARISING OUT OF THE MANUFACTURER'S FAILURE TO HONOR ITS WARRANTY OBLIGATIONS TO YOU. 6. Compliance With Laws. YOU UNDERSTAND AND ACKNOWLEDGE THAT IT IS YOUR RESPONSIBILITY AND OBLIGATION TO DETERMINE WHETHER YOUR PURCHASE, INSTALLATION OR USE OF ANY PRODUCT OR SERVICE OFFERED OR SOLD ON THE SITE COMPLIES WITH ALL APPLICABLE LAWS, INCLUDING, WITHOUT LIMITATION, ALL U.S. FEDERAL, STATE, AND LOCAL LAWS AS WELL AS THE LAWS OF ANY FOREIGN JURISDICTION(S) THAT MAY APPLY TO YOU. THE COMPANY SHALL NOT BE LIABLE FOR, AND YOU AGREE TO INDEMNIFY, DEFEND AND HOLD THE COMPANY AND ITS MEMBERS, MANAGERS, EMPLOYEES, OFFICERS, DIRECTORS, AGENTS, AFFILIATES, SUBSIDIARIES, PARENT COMPANIES, SUCCESSORS AND ASSIGNS HARMLESS FROM AND AGAINST, ANY AND ALL CLAIMS, LOSSES OR LIABILITIES WHATSOEVER ARISING OUT OF OR RELATED TO: (a) YOUR PURCHASE, INSTALLATION, OR USE OF ANY PRODUCT OR SERVICE PROVIDED BY THE COMPANY; (b) YOUR MISUSE OF ANY PRODUCT OR SERVICE PURCHASED FROM THE COMPANY; OR (c) YOUR FAILURE TO COMPLY WITH ALL APPLICABLE LAWS, INCLUDING, WITHOUT LIMITATION, FEDERAL AND STATE EMISSIONS AND SAFETY REGULATIONS, TRAFFIC LAWS, AND LOCAL NOISE ORDINANCES, IN CONNECTION WITH THE USE OF ANY PRODUCT OR SERVICE PROVIDED BY THE COMPANY. 7. Acknowledgment of Emissions Restrictions. YOU UNDERSTAND AND ACKNOWLEDGE THAT CERTAIN PRODUCTS AVAILABLE FOR PURCHASE AT THE SITE ARE INTENDED FOR OFF-ROAD OR TRACK/COMPETITION USE ONLY AND ARE NOT INTENDED FOR PUBLIC STREET OR HIGHWAY USE IN ANY JURISDICTION WHERE APPLICABLE LAW RESTRICTS OR PROHIBITS SUCH USE. WE HAVE DONE OUR BEST TO IDENTIFY SUCH PRODUCTS CLEARLY ON THE SITE. HOWEVER, IT IS YOUR RESPONSIBILITY TO ENSURE THAT YOUR PURCHASE, INSTALLATION, OR USE OF ANY PRODUCT OR SERVICE OFFERED OR SOLD ON OUR SITE COMPLIES WITH ALL APPLICABLE LAWS. THE COMPANY DOES NOT MAKE ANY REPRESENTATION, WARRANTY OR CLAIM (EXPRESS OR IMPLIED) TO YOU OR ANY OTHER PARTY REGARDING THE EMISSIONS COMPLIANCE OR EMISSIONS PERFORMANCE OF, OR THE LEGALITY FOR PUBLIC STREET OR HIGHWAY USE OF, THE PRODUCTS AND SERVICES PROVIDED BY THE COMPANY. FOR MORE INFORMATION REGARDING PRODUCT EMISSIONS COMPLIANCE, CONSULT WITH THE PRODUCT'S MANUFACTURER. 8. Vehicle Warranties. In no event will the Company be liable or responsible to you for any loss of coverage under, denial of coverage under, or alteration or change to the terms of, any manufacturer's or aftermarket warranty covering your vehicle that results from (directly or indirectly) the installation or use of any product or service purchased from the Company. For more information about warranty coverage and after-market parts, please refer to the Frequently Asked Questions section of the Site at FAQs. 9. Customer Responsibility, Research, and Proper Use. YOU ARE SOLELY RESPONSIBLE FOR RESEARCHING, UNDERSTANDING, AND DETERMINING THE SUITABILITY OF ANY PRODUCT OR SERVICE OFFERED BY THE COMPANY BEFORE PLACING AN ORDER. THE COMPANY MAKES NO REPRESENTATION OR WARRANTY THAT ANY PRODUCT OR SERVICE IS APPROPRIATE FOR YOUR VEHICLE, YOUR SKILL LEVEL, YOUR INTENDED USE, OR YOUR JURISDICTION. The Company will not be liable or responsible to you for any damage, loss, expense, downtime, diminution in value, or other harm arising out of, or in connection with: (a) your failure to research, read, or understand product descriptions, service descriptions, instructions, technical documentation, manufacturer guidance, installation procedures, or these Terms prior to purchase; (b) your improper, incorrect, incomplete, or unqualified installation, removal, handling, transportation, storage, or use of any product or service; (c) any modification, flash, reflash, calibration change, repair, or other work performed on your vehicle or any vehicle component before, during, or after the Company's involvement, whether by you or by a third party; (d) your selection of an installer, tuner, dyno operator, or other third party; or (e) any pre-existing condition, fault, defect, prior damage, or prior modification of your vehicle or any component delivered to or worked on by the Company, whether or not such condition was known or disclosed at the time of service. You acknowledge that performance, tuning, and ECU-related products and services involve inherent technical risk, including the risk of component failure, loss of vehicle drivability, and total component loss, and you accept that risk as a condition of purchase. 10. DME / ECU Unlock Services. THE FOLLOWING TERMS APPLY TO ANY DME UNLOCK, ECU UNLOCK, BENCH UNLOCK, OR SIMILAR SERVICE OFFERED BY THE COMPANY (COLLECTIVELY, "UNLOCK SERVICES"). BY PURCHASING AN UNLOCK SERVICE, YOU EXPRESSLY ACKNOWLEDGE AND AGREE TO EACH OF THE PROVISIONS BELOW. (a) Scope of the Unlock. An Unlock Service unlocks the bootloader of the DME (Digital Motor Electronics) or ECU so that the unit can be flash-tuned by you or a third party using compatible tuning software. THE UNLOCK SERVICE DOES NOT MODIFY, OVERWRITE, ALTER, OR OTHERWISE CHANGE THE CALIBRATION, MAPS, PARAMETERS, OPERATING SOFTWARE, OR VEHICLE-SPECIFIC DATA STORED ON THE DME. THE UNLOCK SERVICE IS A SOFTWARE PERMISSION CHANGE ONLY. (b) Pre-Existing Condition of the DME. The Company performs Unlock Services on the DME in the condition received. The Company does not, and cannot, audit, validate, or repair the existing software, calibration, or hardware integrity of a DME prior to performing an Unlock Service. If a DME has been previously flashed, partially flashed, interrupted during a flash, corrupted, modified, tampered with, water-damaged, electrically damaged, or otherwise compromised before being sent to the Company, the Unlock Service may still complete successfully on the bootloader while the underlying calibration or operating files remain corrupted or non-functional. THE COMPANY IS NOT RESPONSIBLE FOR THE CONDITION OR FUNCTIONALITY OF A DME THAT WAS ALREADY DAMAGED, FLASHED, BRICKED, OR CORRUPTED BEFORE THE UNLOCK SERVICE WAS PERFORMED. We have the right to refuse service to any DME that has obvious signs of being modified or compromised. (c) Removal, Shipping, and Reinstallation. You are solely responsible for safely removing the DME from your vehicle, packaging it, shipping it, receiving it back, and properly reinstalling it. The Company is not responsible for damage caused by improper removal, shipping damage, mis-seated or swapped connectors, bent or broken pins, electrostatic discharge, water or contamination exposure, or any other handling-related issue occurring outside the Company's physical possession of the unit. (d) Required Use of Compatible Tuning Software. An unlocked DME still requires properly licensed, vehicle-appropriate tuning software (such as bootmod3, MHD, or other compatible platforms) to flash a tune. The Company does not provide such licenses as part of the Unlock Service unless explicitly stated in writing on the order. You are responsible for selecting, purchasing, and correctly using the appropriate tuning software, and for verifying compatibility with your specific vehicle and DME hardware/software version. (e) No Guarantee of Vehicle Operation Post-Service. While the Company performs Unlock Services using industry-standard tooling and processes, the Company does not guarantee that your vehicle will operate without fault, warning lights, limp mode, or diagnostic trouble codes following reinstallation, particularly where pre-existing conditions, third-party modifications, sensor failures, wiring issues, or installation errors are present. (f) Sole Remedy for Unlock Services. Notwithstanding any other provision of these Terms, your sole and exclusive remedy for any claim arising out of or relating to an Unlock Service shall be, at the Company's sole election: (i) a refund of the amount paid for the Unlock Service; or (ii) a re-attempt of the Unlock Service on the same unit. THE COMPANY SHALL NOT BE LIABLE FOR THE COST OF DME REPLACEMENT, DEALER DIAGNOSTIC FEES, TOWING, RENTAL VEHICLES, LOSS OF USE, LOST WAGES, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. (g) Acknowledgment of Risk. UNLOCK SERVICES INVOLVE INHERENT TECHNICAL RISK. BY PURCHASING AN UNLOCK SERVICE, YOU REPRESENT THAT YOU HAVE INDEPENDENTLY RESEARCHED THE PROCEDURE, UNDERSTAND ITS PURPOSE AND LIMITATIONS, AND ACCEPT FULL RESPONSIBILITY FOR THE OUTCOME ON YOUR VEHICLE. (h) Age and Authority to Purchase. Unlock Services and other tuning-related services are offered only to purchasers who are at least eighteen (18) years of age and who are the legal owner of the vehicle (or an authorized agent of the owner). By purchasing an Unlock Service, you represent and warrant that you meet these requirements. The Company reserves the right to cancel any order found to be in violation of this provision and to refund the amounts paid, less any costs already incurred. 11. Goods Not for Resale or Export. You represent and warrant that you are buying products or services from the Site for your own use only, and not for resale or export. You further represent and warrant that all purchases are intended for final delivery to the location you identified in your order at the Site. 12. Limitation of Liability. (a) IN NO EVENT SHALL WE BE LIABLE TO YOU OR ANY THIRD PARTY FOR CONSEQUENTIAL, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR ENHANCED DAMAGES, LOST PROFITS OR REVENUES OR DIMINUTION IN VALUE, ARISING OUT OF, OR RELATING TO, AND/OR IN CONNECTION WITH ANY BREACH OF THESE TERMS, REGARDLESS OF (i) WHETHER SUCH DAMAGES WERE FORESEEABLE, (ii) WHETHER OR NOT WE WERE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND (iii) THE LEGAL OR EQUITABLE THEORY (CONTRACT, TORT OR OTHERWISE) UPON WHICH THE CLAIM IS BASED. (b) OUR SOLE AND ENTIRE MAXIMUM LIABILITY, FOR ANY REASON, AND YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY CAUSE WHATSOEVER, SHALL BE LIMITED TO THE ACTUAL AMOUNT PAID BY YOU FOR THE PRODUCTS AND SERVICES YOU HAVE ORDERED THROUGH OUR SITE. (c) The limitations of liability set forth in this Section 12 shall (i) only apply to the extent permitted by law, and (ii) not apply to any liability resulting from our gross negligence or willful misconduct. 13. Force Majeure. We will not be liable or responsible to you, nor be deemed to have defaulted or breached these Terms, for any failure or delay in our performance under these Terms when and to the extent such failure or delay is caused by or results from acts or circumstances beyond our reasonable control, including, without limitation, acts of God, flood, fire, earthquake, explosion, governmental actions, war, invasion or hostilities (whether war is declared or not), terrorist threats or acts, riot or other civil unrest, national emergency, revolution, insurrection, epidemic, pandemic, lockouts, strikes or other labor disputes (whether or not relating to our workforce), restraints or delays affecting carriers, inability or delay in obtaining supplies of adequate or suitable materials, or telecommunication breakdown or power outage. 14. Governing Law and Jurisdiction. All matters arising out of or relating to these Terms are governed by and construed in accordance with the internal laws of the State of New Jersey without giving effect to any choice or conflict of law provision or rule (whether of the State of New Jersey or any other jurisdiction) that would cause the application of the laws of any jurisdiction other than those of the State of New Jersey. 15. Dispute Resolution and Binding Arbitration. YOU AND THE COMPANY ARE AGREEING TO GIVE UP ANY RIGHTS TO LITIGATE CLAIMS IN A COURT OR BEFORE A JURY, OR TO PARTICIPATE IN A CLASS ACTION OR REPRESENTATIVE ACTION WITH RESPECT TO A CLAIM. OTHER RIGHTS THAT YOU WOULD HAVE IF YOU WENT TO COURT MAY ALSO BE UNAVAILABLE OR MAY BE LIMITED IN ARBITRATION. ANY CLAIM, DISPUTE OR CONTROVERSY (WHETHER IN CONTRACT, TORT OR OTHERWISE, WHETHER PRE-EXISTING, PRESENT OR FUTURE, AND INCLUDING STATUTORY, CONSUMER PROTECTION, COMMON LAW, INTENTIONAL TORT, INJUNCTIVE AND EQUITABLE CLAIMS) BETWEEN YOU AND US ARISING FROM OR RELATING IN ANY WAY TO YOUR PURCHASE OF PRODUCTS OR SERVICES THROUGH THE SITE, WILL BE RESOLVED EXCLUSIVELY AND FINALLY BY BINDING ARBITRATION. The arbitration will be administered by the American Arbitration Association ("AAA") in accordance with the Consumer Arbitration Rules (the "AAA Rules") then in effect, except as modified by this Section 15. (The AAA Rules are available at www.adr.org/arb_med or by calling the AAA at 1-800-778-7879.) The Federal Arbitration Act will govern the interpretation and enforcement of this section. The arbitrator will have exclusive authority to resolve any dispute relating to arbitrability and/or enforceability of this arbitration provision, including any unconscionability challenge or any other challenge that the arbitration provision or the agreement is void, voidable, or otherwise invalid. The arbitrator will be empowered to grant whatever relief would be available in court under law or in equity. Any award of the arbitrator(s) will be final and binding on each of the parties, and may be entered as a judgment in any court of competent jurisdiction. You may elect to pursue your claim in small-claims court rather than arbitration if you provide us with written notice of your intention to do so within sixty (60) days of your purchase. The arbitration or small-claims court proceeding will be limited solely to your individual dispute or controversy. You agree to an arbitration on an individual basis. In any dispute, NEITHER YOU NOR THE COMPANY WILL BE ENTITLED TO JOIN OR CONSOLIDATE CLAIMS BY OR AGAINST OTHER CUSTOMERS IN COURT OR IN ARBITRATION OR OTHERWISE PARTICIPATE IN ANY CLAIM AS A CLASS REPRESENTATIVE, CLASS MEMBER, OR IN A PRIVATE ATTORNEY GENERAL CAPACITY. The arbitral tribunal may not consolidate more than one person's claims, and may not otherwise preside over any form of a representative or class proceeding. The arbitral tribunal has no power to consider the enforceability of this class arbitration waiver and any challenge to the class arbitration waiver may only be raised in a court of competent jurisdiction. If any provision of this arbitration agreement is found unenforceable, the unenforceable provision will be severed, and the remaining arbitration terms will be enforced. 16. Assignment. You will not assign any of your rights or delegate any of your obligations under these Terms without our prior written consent. Any purported assignment or delegation in violation of this Section 16 is null and void. No assignment or delegation relieves you of any of your obligations under these Terms. 17. No Waivers. The failure by us to enforce any right or provision of these Terms will not constitute a waiver of future enforcement of that right or provision. The waiver of any right or provision will be effective only if in writing and signed by a duly authorized representative of the Company. 18. No Third-Party Beneficiaries. These Terms do not and are not intended to confer any rights or remedies upon any person or entity other than you. 19. Notices. (a) To You. We may provide any notice to you under these Terms by: (i) sending a message to the email address you provide; or (ii) by posting to the Site. Notices sent by email will be effective when we send the email and notices we provide by posting will be effective upon posting. It is your responsibility to keep your email address current. (b) To Us. To give us notice under these Terms, you must contact us by either (i) using the "Contact Us" form provided at the Site, or (ii) contacting us by email at info@kiesmotorsports.com. We may update the method for notices to us by posting a notice on the Site. Notices provided by electronic transmission will be effective one business day after they are sent. 20. Severability. If any provision of these Terms is invalid, illegal, void or unenforceable, then that provision will be deemed severed from these Terms and will not affect the validity or enforceability of the remaining provisions of these Terms. 21. Entire Agreement. These Terms, together with any order confirmation or invoice we issue to you, will be deemed the final and integrated agreement between you and us on the matters contained in these Terms.

TERMS (REQUIRED)

OFF-ROAD USE POLICY & EMISSIONS COMPLIANCE NOTICE

California Proposition 65 Warning:

This product can expose you to chemicals such as lead and lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

For a complete list of chemicals known to cause harm, visit https://www.p65warnings.ca.gov/chemicals.

EPA / CARB Compliance & Legal Use:

Under the federal Clean Air Act (42 U.S.C. §7522(a)(3)), it is illegal to manufacture, sell, install, or use any part that defeats or alters a motor vehicle’s emission control system for use on public roads. Unless a product has received an Executive Order (EO) from the California Air Resources Board (CARB), it is not legal for use or installation on any pollution-controlled vehicle driven on public highways.

Civil penalties up to $4,819 per violation per vehicle
Possible criminal penalties under the Clean Air Act
Revocation of registration or smog certification by DMV or local authorities

State & Local Regulations:

Some states have CARB-equivalent or independent emissions laws. Customers are responsible for verifying local regulations before purchasing or installing emissions-related products.

Intended Use & Customer Certification:

All performance, racing, or competition parts sold by this company are intended solely for off-road, closed-course, or competition use on vehicles that are never registered or used on public highways.

I have read and understood the California Proposition 65 Warning. I have read and understood the EPA/CARB Compliance Notice. I understand these products are intended for off-road or competition use only. I acknowledge that it is my responsibility to comply with all federal, state, and local emissions laws. I understand that installation or use on a public road vehicle is a violation of the Clean Air Act and may subject me to personal liability.

Company Policy Statement

Kies Motorsports, LLC sells and markets these products for lawful use only. We do not condone or authorize the use of emission-control defeat devices or any modification that violates the Clean Air Act or state regulations.

Full Name:

Email:

Vehicle Year, Make, Model:

Signature:

Sign here with your mouse or finger