-
Vendor:MHD Tuning
MHD Super License for F+G Series B58
The MHD Flasher F+G Series is a complete flash tuning app for your BMW & Toyota A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance,maximum safety, and unrivaled drivability. You...- $590.00 USD
- Unit price
- per
$590.00 USD
-
Vendor:MHD Tuning
MHD CAN FlexFuel Analyzer QuickInstall Kit
MHD FlexFuel Kit – F-Series / G-Series & Toyota Supra (Automatic Transmission) Plug & Play E85 FlexFuel Kit with CAN Ethanol Content Analyzer (ECA) – Works with MHD Super License and EcuTek tunes. Compare F-Series (B46/B48/B58/N55/S55) and G-Series/Supra (B48/B58/S58) versions. Quick Comparison...$490.00 USD- $490.00 USD
- Unit price
- per
$490.00 USD
-
Vendor:proTuning Freaks
BOOTMOD3 B58 - BMW FXX GXX 140i 240i 340i 440i 540i 740i M240i M140i X3 40i M40i
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:xAutomotive
xHP TCU Flash Combo 8 Speed (G-Series/Supra)
xHP TCU Flash Combo – 8 Speed (G-Series/Supra) | Kies Motorsports Kies Motorsports Performance & Tuning Specialists Home › Software & Tuning › xHP Flashtool › xHP TCU Flash Combo – 8 Speed (G-Series/Supra) xHP Flashtool — Kies Motorsports xHP TCU Flash Combo Flash...- $549.99 USD
- $549.99 USD
- Unit price
- per
-
Vendor:proTuning Freaks
ProTuning Freaks Bootmod3 Flex Fuel Kit
bootmod3 Flex Fuel Kit Updates for S55 N55 - New Install Location https://www.youtube.com/watch?v=uTySAcKhTCw *** NOTE *** B58 Gen1 G-Series and Gen2 G-series/A9x Supra vehicle plug and play harness and flex fuel sensor adapter are in the works *Flex Fuel Sensor Provided* We are...- $599.00 USD
$649.00 USD- $599.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 X58 FLEX FUEL
The Visconti Tuning X58 Flex Fuel Kit is the most advanced and user-friendly flex fuel solution available. This fully CAN bus-integrated system communicates directly with the factory ECU while keeping all OEM sensors and fuel lines intact. With true flex fuel support, the tune...- From $490.00 USD
- From $490.00 USD
- Unit price
- per
-
Vendor:Kies Motorsports
PRE - MAY / 2020 BMW/MINI DME BENCH UNLOCK SERVICE for BMW / Mini / Toyota Supra
IMPORTANT NOTICE: We have a verification process in place to confirm that we can unlock your DME before you ship this to us. Please go through this process BEFORE removing your DME for shipping as we will not unlock any DMEs without going through...- From $250.00 USD
- From $250.00 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 B48 B46 - BMW FXX GXX 120i 125i 220i 225i 230i 320i 330i 420i 430i 520i 530i X3/X4 20i 30i
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:MST
MST 2021+ BMW G8X M2 / M3 / M4 Competition S58 Cold Air Intake System
Lead time is approximately 2 weeks Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off road and racing use...- $767.80 USD
$767.80 USD- $767.80 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 N20 N26 - BMW F Chassis 125i 220i 228i 320i 328i 420i 428i 520i 528i Tune
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:Kies Motorsports
Kies Motorsports BMW G Series / Toyota A90/A91 - B58 Charge Pipe
Introducing, the all-new charge pipe lineup, from Kies Motorsports! The charge pipe and boost pipe are the pipes that hold pressurized air from your turbo and take it to your engine. Unfortunately, BMW typically makes OEM charge pipes out of plastic or rubber, which is a terrible...- $299.00 USD
$320.00 USD- $299.00 USD
- Unit price
- per
-
Vendor:AWE
AWE EXHAUST SUITE FOR THE BMW G8X M3/M4 - Track Edition Catback
Welcome to the party in the back. Presenting the AWE Exhaust Suite for the BMW G8X M3 & M4: 50-state emissions-complaint dual 3” exhaust configuration Available as valved SwitchPath™ or rowdy Track Edition AWE's first SwitchPath™ exhaust for BMW to incorporate drone-canceling 180...- $2,155.00 USD
$2,268.42 USD- $2,155.00 USD
- Unit price
- per
-
Vendor:Go Fast Bits
GFB DV+ BMW N20 Engine
Furthermore, these benefits won't cost you the Earth! Rather than throwing the entire factory diverter valve system in the trash (like other manufacturer's "solutions"), the DV+ keeps what works, and replaces what doesn't. It retains the factory solenoid and ECU control to ensure simple...- $153.90 USD
$171.00 USD- $153.90 USD
- Unit price
- per
-
Vendor:Turbosmart
Turbosmart BMW N55 3.0L (E90/E92/F30) BOV Kompact EM Dual Port VR9 (No Drop Ship)
The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world's first genuinely plug-and-play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve. No adaptors, hoses or extra assembly are required.This Part...- $315.89 USD
$350.99 USD- $315.89 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 B48 B46 - MINI F54 F55 F56 F57 F60 COOPER S JCW TUNE
World's First, Most Advanced and Widely Adopted cloud-based flash tuning platform for the BMW F and G series vehicles, A90/A91 Supra and MINI.Cloud-based solution with a web-based interface for use with a laptop or with our mobile apps built for iOS and Android! Developed and tested in-house from the...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:CSF
CSF BMW M2/M3/M4 S58 Comp & Non-Comp (G8X) Charge-Air Cooler Manifold - Thermal Dispersion Black
CSF worked closely with its strategic manufacturing partner PWR and Local R&D Partner Studio RSR on the development of the "Level-Up" Charge-Air-Cooler Manifold. The relationship with PWR offers CSF access to exclusive cutting edge Formula 1 grade technology, while Studio RSR offers expertise in...- $6,995.00 USD
- $6,995.00 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 N55 - BMW F Chassis M135I 235I M235I 335I 435I 335I 535I ActiveHybrid 640I X3 X4M40I X4 X5 X6 M2 Tune
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...$595.00 USD- $595.00 USD
- Unit price
- per
$595.00 USD
-
Vendor:MST
MST BMW B58 140i/240i/340i/440i Cold Air Intake System (F Series)
Lead time is approximately 2 weeks. Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off road and racing use...- $463.10 USD
$463.10 USD- $463.10 USD
- Unit price
- per
-
Vendor:proTuning Freaks
BOOTMOD3 S55 - BMW F80 F82 F87 M3 / M4 / M2 Competition Tune
NOTE 1: If you vehicle has had any software updates recently, it is possible that BMW could have locked your DME, which would require bench unlocking to install a BootMod3 tune. NOTE 2: If your DME has a production date after 6/2020, then you...- $595.00 USD
- $595.00 USD
- Unit price
- per
-
Vendor:Kies Motorsports
Kies Motorsports BMW S58 Charge Pipe M2 / M3 / M4 and X3M / X4M Models
Introducing, the all-new charge pipe lineup, from Kies Motorsports! The charge pipe and boost pipe are the pipes that hold pressurized air from your turbo and take it to your engine. Unfortunately, BMW typically makes OEM charge pipes out of plastic or rubber, which is a terrible...- $400.00 USD
$450.00 USD- $400.00 USD
- Unit price
- per


















