APR Carbon Fiber Intake Filter System
Regular price
$579.95
Sale price
$520.95
APR Carbon Fiber Intake Filter System
Regular price
$520.95
Regular price
$579.95
Sale price
$520.95
Unit price
per
APR Carbon Fiber Intake Filter System
Regular price
$579.95
Sale price
$520.95
Select your APR part number using the options above.
CI100038-A — APR Carbon Fiber Intake Filter System - 2.5 TFSI MK3 TT RS/RS3
APR Part Number: CI100038-A
Fits Audi RS3 17-20, TT RS Quattro 18-22
Overview
Adding the optional APR Intake Filter completely transforms the APR Turbocharger Inlet System from subtle to extreme. Our massive 9" long cotton filter with frontal opening connects to a 6" carbon fiber inlet tube that gradually necks down to the 4" back tube. You will hear every ounce of the 5-cylinder turbocharger system's massive demand for airflow, and you'll do so at a 60% CFM improvement over stock! This was only possible with an open filter system as the airflow demands called for an unboxed design. Simply put, this is the best intake system on the market for satisfying uncompromisingly demanding airflow requirements.
Features:
- Pleated Cotton Gauze Filter
- Washable Filter
- Massive 9" filter with a frontal opening and a 6" outlet
- Gorgeous Carbon Fiber tubing
- Massive 6" Inlet that organically necks down to 4"
- Integrated PCV and DV Bungs
- Stainless Steel Mounting Bracket
- Direct fit to the APR Turbocharger Inlet System
- Please note, this system requires the APR Turbocharger Inlet System
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Emission Code | 7 |
| Filter Color | Red |
| Filter Material | Pleated Cotton Gauze |
| Material | Carbon Fiber |
| Product Type | Intake Systems |
| Style | Open |
| Sub Category | Fuel Injection System and Related Components |
| Version | Partial - Air Filter Assembly |
| UPC | 810009931911 |
| Part Number | CI100038-A |
Emissions
7
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Tech Resources
Please Note, this part is not a direct fit. The Turbo Inlet System (CI100038) is required. The DV adapter (CI100038-G) is required on 2019+ vehicles with the updated corrugated DV to intake hose.
Vehicle Applications
- 2017–2020 Audi RS 3 (8V) — 2.5L; United States
- 2018–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Please Note, this part is not a direct fit. The Turbo Inlet System (CI100038) is required. The DV adapter (CI100038-G) is required on 2019+ vehicles with the updated corrugated DV to intake hose.
Instructions - tl100124_rs3_ttrs_intake_web.pdf Please Note, this part is not a direct fit. The Turbo Inlet System (CI100038) is required. The DV adapter (CI100038-G) is required on 2019+ vehicles with the updated corrugated DV to intake hose.
CI100038-G — APR Carbon Fiber Intake Filter System: 2.5 TFSI MK3 TTRS/RS3, DV Adapter for 19+
APR Part Number: CI100038-G
Fits Audi RS3 19-20, TT RS Quattro 19-22
APR availability: Est. Ship Date: 10/09/2026
Overview
The APR Intake System for the 2.5 TFSI, found in the Audi RS3 and TT RS, is now available for the 2019 model year North American vehicles thanks to the new APR Intake Adapter. The adapter is made from CNC machined billet aluminum, with stainless steel bolts, and worm gear clamps, with a nylon reinforced silicon dv reroute hose. The system is easy to install and is plug and play.
Features:
- CNC-machined billet aluminum adapter with o-ring
- Nylon reinforced silicon DV reroute hose
- Stainless steel bolts
- Worm gear clamps
- Plug and play
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Construction | Billet |
| Emission Code | 5 |
| Hose Clamp Type | Worm Gear |
| Material | Billet 6061 Aluminum |
| Product Type | Intake Systems (Adapters) |
| Sub Category | Service Kits |
| Version | Adapter - 2019+ DV |
| UPC | 810009932123 |
| Part Number | CI100038-G |
Emissions
5
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Tech Resources
Vehicle Applications
- 2019–2020 Audi RS 3 (8V) — 2.5L; United States
- 2019–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Instructions - tl100124_rs3_ttrs_intake_web.pdf
CI100038-E — APR 2.5 TFSI EVO Turbocharger Inlet System - TTE625/TTE700 Adapter Ring
APR Part Number: CI100038-E
Fits Audi RS3 17-20, TT RS Quattro 18-22
Overview
Interlocking adapter rings form a port-matched ideal entrance to the turbocharger, while larger rings (sold separately) provide port-matched support for even larger hybrid turbocharger upgrades.
Designed for use with the TTE625 and TTE700 turbocharger.
Features:
- Plug and play adapter for the APR Turbo Inlet System
- Adapts the inlet to the TTE625 turbo (V2)
- Adapts the inlet to the TTE700 turbo
- Simply connect into place
- Optimizes flow for the specific turbo application
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Color | Silver / Natural |
| Emission Code | 5 |
| Grade Type | Performance |
| Inlet Size | 62.8 MM |
| Material | Aluminum |
| Product Type | Intake Systems (Adapters) |
| Sub Category | Hardware, Fasteners and Fittings |
| Version | Adapter - TTE625/700 |
| UPC | 810009930846 |
| Part Number | CI100038-E |
Emissions
5
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Tech Resources
Vehicle Applications
- 2017–2020 Audi RS 3 (8V) — 2.5L; United States
- 2018–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Instructions - ci100038_rs3_inlet_pipe_v3.pdf
CI100038-H — APR Carbon Fiber Intake Filter System - 2.5 TFSI RS Q3 / Formentor VZ5 - Bracket
APR Part Number: CI100038-H
Fits Audi RS Q3 21-24
Overview
The RS Q3 / Formentor VZ5 platform requires a different bracket to fit the APR Ci100038-A Open Intake System. This simple stainless bracket installs easily and makes the install simple.
Features:
- T304 Stainless Steel Components
- Enables fitment of CI100038-A to the RS Q3 / Formentor VZ5
- Plug and Play
- Simple install
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Color | Silver |
| Emission Code | 5 |
| Material | Aluminum |
| Product Type | Intake Systems (Adapters) |
| Sub Category | Brackets, Flanges and Hangers |
| Version | Adapter Bracket - RSQ3 |
| UPC | 810009933991 |
| Part Number | CI100038-H |
Emissions
5
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Tech Resources
Only for use with the CI100038-A Intake System.
Vehicle Applications
- 2021–2024 Audi RS Q3 — 2.5L; Mexico
Fitment Requirements
Only for use with the CI100038-A Intake System.
Instructions - tl100124_rs3_ttrs_intake_web.pdf Only for use with the CI100038-A Intake System.
CI100038-F — APR 2.5 TFSI EVO Turbocharger Inlet System - TTE777 and GTX38582R Adapter Ring
APR Part Number: CI100038-F
Fits Audi RS3 17-20, TT RS Quattro 18-22
Overview
Interlocking adapter rings form a port-matched ideal entrance to the turbocharger, while larger rings (sold separately) provide port-matched support for even larger hybrid turbocharger upgrades.
Designed for use with the TTE777 and GTX3582 turbocharger.
Features:
- Plug and play adapter for the APR Turbo Inlet System
- Adapts the inlet to the TTE777 and GTX3582R turbo
- Simply connect into place
- Optimizes flow for the specific turbo application
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Color | Silver / Natural |
| Emission Code | 5 |
| Grade Type | Performance |
| Inlet Size | 66.1 MM |
| Material | Aluminum |
| Product Type | Intake Systems (Adapters) |
| Sub Category | Hardware, Fasteners and Fittings |
| Version | Adapter - TTE777/GTX |
| UPC | 810009930853 |
| Part Number | CI100038-F |
Emissions
5
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Tech Resources
Vehicle Applications
- 2017–2020 Audi RS 3 (8V) — 2.5L; United States
- 2018–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Instructions - ci100038_rs3_inlet_pipe_v3.pdf
CI100038 — APR Turbocharger Inlet System - 2.5 TFSI EVO
APR Part Number: CI100038
Fits 2017-2020 Audi RS3 and 2018-2022 Audi TT RS
Overview
The APR Turbocharger Inlet System outflows the factory components by up to 45%, and jumps to 60% when adding the APR Intake Filter. This is firstly achieved through elimination of the most critical restriction in the entire intake system, the turbocharger inlet pipe. Because of this restriction, no intake airbox / filter design can physically match the gains achieved by upgrading to the APR Turbo Inlet System alone. This inlet is the first step one should take when upgrading their intake system and paves the way for even more gains by adding the optional intake filter.The APR Turbocharger Inlet System uses a massive 4" carbon fiber inlet tube that attaches to the factory airbox, or the APR Intake Filter System. Attached to the carbon fiber tube is a massive 4" cast aluminum inlet which is organically shaped to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Despite the visually odd shape, keeping the cross-sectional area as large as possible is the key to the pipe's performance gains, and greatly outflows smooth looking continuously tapering designs.Interlocking adapter rings form a port-matched ideal entrance to the turbocharger, while larger rings (sold separately) provide port-matched support for even larger hybrid turbocharger upgrades. A thick stainless-steel heat shield protects the pipe from the hot turbocharger manifold, and an external stainless PCV pipe provides proper PCV placement without impacting the inlet's design.Finally, adding the optional APR Intake Filter completely transforms the system from subtle to extreme.
Our massive 9" long cotton filter with frontal opening connects to a 6" carbon fiber inlet tube that gradually necks down to the 4" back tube. You will hear every ounce of the 5-cylinder turbocharger system's massive demand for airflow, and you'll do so at a 60% CFM improvement over stock! This was only possible with an open filter system as the airflow demands called for an unboxed design. Simply put, this is the best intake system on the market for satisfying uncompromisingly demanding airflow requirements.
Features:
- Massive cast 4" turbo inlet
- Massive 4" carbon fiber tube
- Work with the factory intake or APR intake filter
- Works with various turbos with the interchangeable adapter rings
- Heat shield included
- Massive flow gains (45% over stock and 60% over stock with the APR Filter)
- Increased horsepower and torque
- Better throttle response
- Enhanced engine sound
- All mounting hardware included
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Emission Code | 7 |
| Material | Carbon Fiber, Cast 356-F Aluminum |
| Product Type | Intake Systems (Inlets) |
| Sub Category | Service Kits |
| Version | Kit - Turbo Inlet + Back Tube |
| UPC | 810009930808 |
| Part Number | CI100038 |
Emissions
7
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Tech Resources
Please note, this system does not fit Right Hand Drive (RHD) vehicles. CI100038-G is required for 2019+ vehicles.
Vehicle Applications
- 2017–2020 Audi RS 3 (8V) — 2.5L; United States
- 2018–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Please note, this system does not fit Right Hand Drive (RHD) vehicles. CI100038-G is required for 2019+ vehicles.
Instructions - ci100038_rs3_inlet_pipe_v3.pdf Please note, this system does not fit Right Hand Drive (RHD) vehicles. CI100038-G is required for 2019+ vehicles.
CI100038-B — APR 2.5 TFSI EVO Turbocharger Inlet System - (Rear Carbon Tube Only)
APR Part Number: CI100038-B
Fits Audi RS3 17-20, TT RS Quattro 18-22
Overview
For the DIY customers looking to adapt our inlet system to other intake setups, we offer the Carbon Fiber Back Tube and Cast Aluminum Turbo Inlet separately. Please note, this may require special couplers to adapt to other intake systems.
Features:
- Massive 4" carbon fiber tube
- Work with the factory intake or APR intake filter
- Designed for use with the APR Turbo Inlet Pipe
- Massive flow gains
- Increased horsepower and torque
- Better throttle response
- Enhanced engine sound
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Emission Code | 7 |
| Grade Type | Performance |
| Material | Carbon Fiber |
| Mounting Hardware Included | Yes |
| Product Type | Intake Systems (Inlets) |
| Sub Category | Service Kits |
| Version | Partial - Backtube Only |
| UPC | 810009930815 |
| Part Number | CI100038-B |
Emissions
7
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Tech Resources
Please note, this is not a direct fit part. The Turbo Inlet Pipe (CI100038-C) is required.
Vehicle Applications
- 2017–2020 Audi RS 3 (8V) — 2.5L; United States
- 2018–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Please note, this is not a direct fit part. The Turbo Inlet Pipe (CI100038-C) is required.
Instructions - ci100038_rs3_inlet_pipe_v3.pdf Please note, this is not a direct fit part. The Turbo Inlet Pipe (CI100038-C) is required.
CI100038-C — APR 2.5 TFSI EVO Turbocharger Inlet System - (Cast Inlet Only)
APR Part Number: CI100038-C
Fits Audi RS3 17-20, TT RS Quattro 18-22
Overview
For the DIY customers looking to adapt our inlet system to other intake setups, we offer the Carbon Fiber Back Tube and Cast Aluminum Turbo Inlet separately. Please note, this may require special couplers to adapt to other intake systems.
Features:
- Massive cast 4" turbo inlet
- Designed for use with the APR Carbon Fiber Back Tube
- Massive flow gains
- Works with various turbos with the interchangeable adapter rings
- Heat shield included
- Increased horsepower and torque
- Better throttle response
- Enhanced engine sound
Specifications
| Brand | APR |
|---|---|
| Category | Air and Fuel Delivery |
| Color | Silver / Natural |
| Emission Code | 7 |
| Grade Type | Performance |
| Material | Cast 356-F Aluminum |
| Mounting Hardware Included | Yes |
| Product Type | Intake Systems (Inlets) |
| Sub Category | Service Kits |
| Version | Partial - Inlet Only |
| UPC | 810009930822 |
| Part Number | CI100038-C |
Emissions
7
This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Tech Resources
Please note, this is not a direct fit part. The Turbo Inlet Pipe (CI100038-B) is required.
Vehicle Applications
- 2017–2020 Audi RS 3 (8V) — 2.5L; United States
- 2018–2022 Audi TT RS (8S, FV) — 2.5L; United States
Fitment Requirements
Please note, this is not a direct fit part. The Turbo Inlet Pipe (CI100038-B) is required.
Instructions - ci100038_rs3_inlet_pipe_v3.pdf Please note, this is not a direct fit part. The Turbo Inlet Pipe (CI100038-B) is required.