$595.00 USD
$595.00 USD


















Fitment for the MKV Supra 2.0 and G29 Z4 2.0 B48
Images show intake fitted to a BMW Z4 B48
The MK5 Supra Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the Supra, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from.
During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimize the radiative heat transfer from the exhaust manifold. In order to maximize volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4″) smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.
Each intake system consists of:
** This item is not eligible for return **
Thanks for subscribing!
This email has been registered!
$595.00 USD
$595.00 USD
This product can expose you to chemicals such as lead and lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
For a complete list of chemicals known to cause harm, visit https://www.p65warnings.ca.gov/chemicals.
Under the federal Clean Air Act (42 U.S.C. §7522(a)(3)), it is illegal to manufacture, sell, install, or use any part that defeats or alters a motor vehicle’s emission control system for use on public roads. Unless a product has received an Executive Order (EO) from the California Air Resources Board (CARB), it is not legal for use or installation on any pollution-controlled vehicle driven on public highways.
Some states have CARB-equivalent or independent emissions laws. Customers are responsible for verifying local regulations before purchasing or installing emissions-related products.
All performance, racing, or competition parts sold by this company are intended solely for off-road, closed-course, or competition use on vehicles that are never registered or used on public highways.
Kies Motorsports, LLC sells and markets these products for lawful use only. We do not condone or authorize the use of emission-control defeat devices or any modification that violates the Clean Air Act or state regulations.