Race Technologies G8X M2 / M3 / M4 Performance Street Brake Pads
- $399.00 USD
- $399.00 USD
- Unit price
- per
Hurry up! Only 0 left
Subtotal:
$399.00
Race Technologies · Performance Street Brake Pad
TS20 Compound — Street + Light Track
Engineered for the G8X chassis. Aggressive initial bite, real heat resistance, and the daily-driver manners to leave your wheels clean and your cabin quiet. Built for OEM Brembo steel-brake calipers on the M2, M3, and M4.
✓ Confirmed Fitment
BMW M2
G87 · 2023+
BMW M3 / M3 Comp
G80 / G81 · 2021+
BMW M4 / M4 Comp
G82 / G83 · 2021+
Steel Brakes Only — NOT for Carbon Ceramic
The TS20 pads are designed for the OEM Brembo steel brake / iron rotor option only. They will NOT fit the BMW Carbon Ceramic Brake (CCB) option. If your G8X is equipped with carbon ceramics, contact us before ordering.
Why TS20
Most "street-and-track" pads pick a side. They either grab hard cold and trash your wheels with dust, or they're refined for the daily commute and fade the moment you push them. The Race Technologies TS20 compound is engineered to skip that compromise — built specifically for the OEM Brembo caliper shapes BMW uses on the G8X chassis, with a friction profile tuned for drivers who actually use both ends of the spectrum.
You get strong, confidence-inspiring bite from the first pedal application — cold morning commute or hot lap, the pedal feels the same. The compound holds up to elevated rotor temperatures during canyon runs, autocross, and light track use without glazing or fade. And critically for daily-driven M cars: low dust output keeps your wheels looking right, and a quiet friction profile means no embarrassing pad squeal pulling out of the garage.
What You Get
- Aggressive initial bite — Strong cold and hot pedal feel from the first stop, no warm-up lap required
- Real heat resistance — Holds friction coefficient under sustained braking on canyon roads, autocross, and HPDE days
- Low dust output — Engineered friction material designed to minimize wheel buildup vs. typical track-capable pads
- Quiet operation — Refined friction profile keeps noise to a minimum during daily street driving
- OEM Brembo shape — Direct fit into the factory caliper, no modifications, no carrier swaps
- Dyno-validated compound — Tested on a brake dynamometer over multiple brake applications for accurate, repeatable data
- Available F, R, or as a complete set — Match your build needs or refresh the entire corner package at once
Compound Profile
The TS20 sits squarely in the dual-purpose range — biased toward aggressive street with the headroom to handle light track abuse.
Profile
Bite
Aggressive · Cold & Hot
Profile
Heat
Strong · Light Track
Profile
Dust
Low · Daily Friendly
Profile
Noise
Quiet · Refined
Specifications
| SKU | 2466.20.TS20 |
| Brand | Race Technologies |
| Compound | TS20 |
| Intended Use | Street & Light Track |
| Caliper Fitment | OEM Brembo (G8X Steel Brake Option) |
| Rotor Type | Iron / Steel Rotors Only |
| Vehicle Fitment | BMW M2 (G87), M3 (G80/G81), M4 (G82/G83) |
| Bite Character | Aggressive Initial Bite (Cold & Hot) |
| Dust | Low |
| Noise | Low |
| Validation | Brake Dynamometer Tested (Multi-Application) |
| Configuration Options | Front Set · Rear Set · Front + Rear Set |
| NOT Compatible With | BMW Carbon Ceramic Brake Option (CCB) |
Installation & Bedding
1.0 Direct OEM Replacement
The TS20 is shaped to fit the factory Brembo caliper. No carriers, brackets, or modifications required. Reuse your factory wear sensors and hardware unless damaged.
2.0 Bed In Before Track Use
A proper bed-in cycle is required before pushing the pads hard. Perform a series of progressively heavier stops from highway speeds without coming to a complete stop, then allow the brakes to cool. Skipping bedding can cause uneven friction transfer and noise.
3.0 Pair With Quality Rotors
Pad performance is only as good as the rotor underneath. If your factory rotors are heat-checked, warped, or worn near minimum thickness, replace them at the same time for best results.
4.0 Test Variables
Wear rates and operating temperatures vary with car setup, grip level, track layout, driving style, and ambient conditions. Race Technologies tests every compound on a brake dynamometer over multiple applications for the most accurate baseline data — but real-world results will reflect how you actually drive.
The TS20 Promise
"Aggressive initial bite. Real heat resistance. Low dust and low noise. The dual-purpose compound for drivers who use both the street and the track — and refuse to compromise on either."
About Race Technologies
Race Technologies
Race Technologies develops brake friction compounds for the world's most demanding performance applications — from professional motorsport endurance racing to spirited street driving. Every compound is validated on a brake dynamometer through multi-application testing to produce accurate, repeatable performance data. The TS20 is purpose-built for select OEM Brembo caliper shapes used on modern performance vehicles like the G8X chassis BMW M cars.
Frequently Asked Questions
Will these fit my carbon ceramic brakes?
No. The TS20 pads are designed for the OEM Brembo steel brake calipers with iron rotors only. They will NOT fit the BMW Carbon Ceramic Brake (CCB) option. If your G8X has carbon ceramics, contact Kies Motorsports before ordering and we'll point you to a compatible compound.
Are TS20 pads street-friendly?
Yes. TS20 is purpose-built as a dual-purpose street and light-track compound. It delivers aggressive initial bite when cold while keeping dust and noise low for daily driving — none of the typical track-pad downsides (constant squeal, gray wheels).
Can I use these for full track days?
TS20 is rated for street and light track use — autocross, occasional HPDE, and spirited canyon driving. For dedicated full track day, wheel-to-wheel, or endurance race use, Race Technologies offers more aggressive endurance and race-only compounds. Contact us for guidance on the right compound for your use case.
What G8X models are compatible?
BMW M2 (G87), M3 (G80/G81), and M4 (G82/G83) equipped with OEM Brembo steel brakes. Available as Front Pad Set, Rear Pad Set, or Front and Rear Pad Set — select your configuration above.
Do these come with hardware or wear sensors?
Race Technologies TS20 pads are direct OEM replacement shapes for the Brembo calipers. Reuse your factory wear sensors and hardware unless damaged. Replacement sensors are sold separately if needed — we can include them with your order.
How do I bed these in properly?
Perform a series of 6–10 progressively heavier stops from highway speeds (e.g., 60 to 20 mph) without coming to a complete stop between them. Drive a few minutes at moderate speed afterward to let the brakes cool gradually. Avoid hard, sustained braking until the bed-in cycle is complete. This transfers an even layer of friction material to the rotor surface and prevents judder, noise, and uneven wear.
Kies Motorsports
Authorized Race Technologies dealer. Questions on fitment, compound selection, or compatibility? Reach our team at info@kiesmotorsports.com — we drive these cars. We know the answers.
Kies Recommended Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.
