-
Vendor:Visconti Tuning
B58 S58 PNP Boost Controller Solenoid - EBCS
Commonly used with MOTIV ReFlex or CANBOXPRO systems to control externally gated turbo setups on B48, B58, and S58 engines. If you're running an external gated turbo setup on your B48, B58 or S58, you'll need a boost controller that can handle the job....- $195.00 USD
- $195.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
S58/B58 Sequential Port Injection Kit
The Visconti Tuning S58 B58 Sequential Port Injection Kit provides a complete plug and play port injection solution designed to support high horsepower BMW S58 and B58 applications. Visconti Tuning is excited to present several new advancements for the S58 and B58 platform. Our...- From $1,395.00 USD
- From $1,395.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
EcuTek ECU Connect Bluetooth Interface
High-speed Bluetooth connectivity for your mobile device Datalogging Display and record factory and RaceROM diagnostic parameters, including engine and transmission simultaneously* RaceROM integration Driver interaction with RaceROM features* Performance Analyser Test and share the results online Archive Stores log files and performance test results for sharing with tuners...- From $320.00 USD
- From $320.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
ReFlex+ Visconti S58/B58 Sequential Port Injection Wiring Kit
The Visconti S58/B58 Sequential Port Injection Wiring Kit is our complete plug and play harness designed specifically for use with the ReFlex+ controller. This kit does not reuse any MOTIV wiring. All you need is a ReFlex+, this wiring kit, and the required I/O...- $895.00 USD
- $895.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B48 B58 S58 Charge Pipe Sensor Adapter Harness
Plug and play charge pipe pressure sensor adapter harness for BMW B48, B58, and S58 engines designed for use with AEM 5, 6, or 7 BAR boost sensors. The B48 B58 S58 Charge Pipe Sensor Adapter Harness allows you to replace the factory 4...- $40.00 USD
- $40.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 X58 FLEX FUEL
The Visconti Tuning X58 Flex Fuel Kit is the most advanced and user-friendly flex fuel solution available. This fully CAN bus-integrated system communicates directly with the factory ECU while keeping all OEM sensors and fuel lines intact. With true flex fuel support, the tune...- From $490.00 USD
- From $490.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
THOR WiFi Adapter: Wireless BMW Tuning & Diagnostics
Required for wireless flashing and datalogging when using the Thor software platform on supported BMW vehicles. The THOR WiFi adapter allows you to diagnose, troubleshoot, program,code and more with the most popular apps. 1 1/2 Faster than regular K/Dcan cables on the market.Supported Apps:THOR...- $69.00 USD
- $69.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
ReFlex+ Visconti S58/B58 Fuel Pump Extension Harness
Plug and play fuel pump extension harness for BMW B58 and S58 ReFlex systems designed to extend the 2-pin DTM fuel pump wiring to the ReFlex controller location. The Visconti B58 S58 Fuel Pump Extension Harness is used in our ReFlex+ kits to allow...- $30.00 USD
- $30.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 Replacement Fuel Line
The Visconti Tuning B58 S58 Replacement Fuel Line is a vehicle-specific fuel line used with Visconti Flex Fuel or Port Integration fittings. This line connects the 3/8 side of the flex fuel sensor to the 5/16 factory fuel feed connection located near the strut...- $75.00 USD
- $75.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 Replacement PTCAN Connector Kit
The Visconti Tuning B58 S58 Replacement PTCAN Connector Kit provides the same connector and terminal tool used in our X58 PTCAN Flex Fuel and Plug and Play ReFlex Port Injection Kits. This kit is commonly needed when purchasing used Visconti PTCAN-based systems where the...- $15.00 USD
- $15.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 Flex Fuel Integration Fitting
Designed specifically for use with the GM Continental ethanol content sensor used in most flex fuel applications. The Visconti Tuning B58 S58 Flex Fuel Integration Fitting is designed to integrate a flex fuel sensor into the factory high pressure fuel pump hard line. The...- $60.00 USD
- $60.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
ReFlex+ Plug and Play Install Harness — BMW S58/B58
The Visconti Tuning ReFlex+ Plug and Play Install Harness eliminates cutting, crimping, or splicing when installing a ReFlex+ controller on BMW S58 and B58 platforms using the standard install harness. It allows the MOTIV main harness to interface directly with the factory wiring while...- $420.00 USD
- $420.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
ReFlex+ 0-10 Bar Pressure Sensor
The ReFlex 0-10 Bar Pressure Sensor provides accurate pressure measurement for motorsport applications including fuel pressure, oil pressure, boost pressure, coolant pressure, and exhaust back pressure. This 10 bar pressure sensor is ideal for high performance engines requiring reliable pressure monitoring. This sensor connects...- $110.00 USD
- $110.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
Billet Rear Ride Height Sensor Bracket - Toyota GR Supra A90 A91 / BMW G20 G29
Billet aluminum replacement for the fragile factory rear ride height sensor bracket used on A90/A91 Supra and BMW G20/G29 vehicles. The original billet upgrade for your A90/A91 Supra and G20/G29 BMW rear ride height sensor. These cars use two suspension ride height sensors to...- $85.00 USD
- $85.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
ReFlex+ Control Unit
The ReFlex+ Control Unit is an advanced integration module for performance vehicle tuning and auxiliary component control. The ReFlex+ was designed to run in a variety of configurations from standalone tuning to full CAN Bus integration, the ReFlex+ offers unparalleled precision, flexibility, and performance. Advanced Control Strategies...- $729.00 USD
- $729.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
ReFlex+ Bracket – G80 M3 / G82 M4 / G87 M2
The Visconti Tuning ReFlex+ Bracket for BMW G80 M3, G82 M4, and G87 M2 provides a secure mounting solution for the MOTIV ReFlex+ controller. The Visconti Tuning MOTIV ReFlex+ bracket designed for the G80 M3 / G82 M4 / G87 M2 cleanly and safely...- $40.00 USD
- $40.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 Crankcase Vent Heater Jumper
The Visconti Tuning B58 S58 Crankcase Vent Heater Jumper restores the factory crankcase vent heater connection on vehicles equipped with flex fuel or ReFlex installations. Some flex fuel or ReFlex harness installations utilize the factory crankcase vent heater connector for power, leaving the original...- $40.00 USD
- $40.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
B58 S58 Replacement PTCAN Jumper Kit
The Visconti Tuning B58 S58 PTCAN Jumper Kit is a replacement jumper harness used in the Visconti X58 PTCAN Flex Fuel Subharness found in our X58 Flex Fuel and Plug and Play ReFlex Port Injection Kits. This kit is commonly needed when purchasing used...- $50.00 USD
- $50.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
G20/G42 M240 M340 STG1 Fuel System Upgrade
Stage 1 fuel system upgrade designed to increase fuel delivery capacity for high horsepower B58 applications. This system is designed for BMW G20 M340 and G42 M240 platforms where additional low pressure fuel supply is required to support upgraded turbos, port injection, and higher...- $1,295.00 USD
- $1,295.00 USD
- Unit price
- per
-
Vendor:Visconti Tuning
G80 G82 M3 M4 STG1 Fuel System Upgrade
Stage 1 fuel system upgrade designed to increase fuel delivery capacity for high horsepower S58 applications. This system is designed for BMW G80 M3 and G82 M4 platforms where additional low pressure fuel supply is required to support upgraded turbos, port injection, and higher...- $1,295.00 USD
- $1,295.00 USD
- Unit price
- per















